Home Improvement

Water Reticulation System Maintenance Needs

An irrigation system also referred to as lawn reticulation, is a water distribution system installed in lawns to supply water consistently throughout the property.

It is an essential part of lawn maintenance because it makes sure the lawn is watered on a regular basis even when someone isn’t there to manually water the entire lawn.

If you do not know yet, water reticulation systems can be automated. That said, you can save a lot of time and energy doing the watering on your own. But then, the water reticulation itself needs maintenance.

If you want to continuously save time and energy watering the lawn yourself, you need to show your water reticulation system some love.

In this article, we will talk about water reticulation maintenance so you can continuously enjoy a lusciously green lawn or garden without doing all the necessary watering on your own.

Water Reticulation System Maintenance Tips

A. Regularly inspect your reticulation system by watching it work.

The best inspection method you can do is to watch the water reticulation system, be it a sprinkler or drip reticulation, if possible. Turn on your irrigation system and watch it work to spot typical issues.

Typical issues include:

  • some areas are not reached
  • sprinklers and drips are not spraying and dripping water
  • extreme or low water pressure in certain areas

B. Replace or repair sprinkler heads whenever necessary.

After the inspection, if you notice that a certain part of the water reticulation system needs repair, leave a mark so you know the exact area that needs to be repaired.

Marking the problematic sprinklers will direct you back to the areas requiring repair because sprinkler heads can be difficult to find and impossible to tell apart when they are not spraying.

Compared to sprinkler heads in covered areas, those that are exposed to the elements are more likely to sustain damage.

Water will not be distributed evenly across your lawn when sprinkler heads are missing or broken, leading to wet spots and runoff. In the long run, this could harm your lawn because too many wet spots will probably cause you to water it excessively.

The material of the sprinklers will inevitably deteriorate over time, and if you wait long enough, even the untrained eye will soon be able to clearly see signs of wear and tear.

Keeping track of how long the old sprinkler heads have been in place would allow you to replace them before any damage could be seen. If you do not want to add this to the list of your responsibilities, leave it to Perth reticulation repairs.

C. Clean and adjust your sprinkler heads regularly.

The sprinkler heads often clog because they are exposed and placed around dirt and mud all the time.

Although it might seem unimportant, this straightforward problem can cause your lawn or garden to be watered unevenly.

A clogged sprinkler head will first show irregular water spraying. Hence, if you notice uneven water spraying, you can go ahead and check your sprinkler heads.

Along with checking for missing, clogged, and damaged sprinkler heads, you should also make sure that all of the heads are positioned correctly.

Uneven watering and dry patches are the results of tilted heads, which are frequently brought on by a bump from a lawnmower or a foot.

D. Install season sensors and adjust them if necessary.

Distinct plants require different amounts of water. Additionally, the time of year will probably affect how much water is needed.

In comparison to the cooler, wetter spring and fall months, plants need a lot more water during the summer’s peak heat.

In addition, running your irrigation sprinklers during a downpour is not only wasteful, but it could also oversaturate your yard.

Water usage can be decreased and the health of the lawn can be maintained by modifying your reticulation system as needed throughout the year based on the season and plant requirements.